Single 10mm LED light for use with the Stair Light Controller. This unit comes ready to install. It is prepped with a 7 inch wire lead and includes two wire connectors. The black plastic light bezel provides a nice flush mount look on any surface. Note that the quarter is only shown as a size indication. When off the LED lens is clear, the plastic bezel only comes in black but is easily painted to match any decor you may have. We recommend using Krylon plastic spray paint if you want a color other than black.
Installation is easy, simply drill a 9/16 inch hole in the stair at the desired location, pop this unit in and connect it to a wire running to the stair lighting controller. You will need to purchase one LED light for each step you want to light.
This light will work with any 5 volt system and draws 20mA of current.
We understand that this stair lighting option might not fit all applications, if it doesn't you might want to have a look at the Reactive Lighting Stair Lighting Systems which have more lighting options available.
Here are a few pictures of the light
The lower pictures show the stair light installed in a piece of 1/2 inch wood to demonstrate what the bezel looks like when mounted.
